1. Quick Mount Block - 1
2. Zip Ties - 4
3. Philips Head Screws - 4
4. Thumb Screw - 1
5. Buckle & Strap - 1
6. Limb Assembly bottom - 1
7. Wing nuts - 4
8. Limb Assembly top cap - 1

Place limb assembly on a level surface and insert each CamoFlex limb into the molder grooves - the 90 degree bend goes down into the holes provided

Place limb assembly top cap on the limb assembly base and fasten using the Phillips head screws.

Screw the thumb screw into the top middle hole in the limb assembly top cap - this will allow you to lock the limbs securely to the quick mount block on your stand or against the tree.

Now you have the choice of mount the Quick Mount block on the tree using the buckle & strap, the teeth on the back side of the Quick Mount block grips the tree bark to eliminate slipping or...

Mount the Quick Mount directly to any make of tree stand using the Zip Ties.

Slide your complete limb assembly over the Quick Mount block and secure by tightening the locking thumb screw

With the optional Ground Spike you can work your CamoFlex System into a ground blind. Just like a tree stand or tree setup, the limb assembly slides over the Ground Spike for fast, effective setup.